 |
 |
 Custom Car Cover Materials
Coverking designs car cover materials in-house and contracts production
of the fabric to the world's leading textile mills. Coverking refuses
to use "off the shelf" fabrics - such materials rarely meet the unique
and demanding needs of a car cover material. Following are detailed
pictures, information and ratings of Coverking Custom Car Cover fabrics.
Coverking Custom Car Cover Fabrics are developed under strict quality
standards. Click a fabric title to learn more.
| Material Properties Legend
|
Coverking has a wide selection of
materials, each selected to meet a particular cover need and
budget. Below are the 6 criteria used for Custom Car Cover Materials,
and an explanation of each.
|
 |
Water Resistance
is a relative grade of how much water will penetrate the fabric.
A "5" signifies the most water resistant material. WATERPROOF
materials will not breathe, trapping moisture. All Coverking
materials are water resistant, not waterproof. |
 |
 |
The Sun's UV Rays
damage a vehicle's interior, finish, and also the car cover
material. Materials with a "5" rating are most likely not to
degrade under extreme sun conditions. |
 |
Breathability describes
how much moisture vapor trapped under the vehicle can escape
through the cover. If a material is not breathable, it will
trap moisture and cause rust. A "5" signifies the most breathable
material. |
 |
 |
Natural and Man-Made Hazards,
such as bird droppings, tree droppings and industrial fall out
are very acidic, and can eat through a car's finish. A score
of "5" identifies the material most resistant to these dangerous
chemicals. |
 |
Compactness measures
how easily the material is to pack, and how small the final
packed cover is. A score of "5" identifies the most compact
cover. This is an important attribute if you will use your cover
often. |
 |
 |
All Coverking materials
are designed not to scratch a vehicle's finish (assuming the
vehicle is clean when the cover is installed. However, some
materials are softer than others. A "5" rating is the softest.
|
| Stretch Satin™ Custom
Car Cover |
 |
Satin Stretch is an indoor Custom
Car Cover fabric. It will fade if exposed to extended sun, and
is not water resistant.
Satin Stretch is the SOFTEST fabric available, and has Lycra
yarns to hug every contour of a vehicle. Blind stitching results
in invisible seams - this is a SEXY car cover! Click here for
more detailed information. |
Triguard™ |
 |
A 3 layer Custom Car Cover material
suited for light weather conditions (perfect for occasional
use or vehicles stored under a carport). Triguard is fairly
soft and very compact. Do not use Triguard in harsh weather
or sun. Triguard is also not suited in areas with industrial
fall out (acid rain). Click here for more detailed information.
|
Coverbond 4™  |
 |
4 layers make Coverbond 4 a very
thick and bulky Custom Car Cover. It is not suggested for daily
users, or for people with large SUVs. However, the extra bulk
helps to guard against minor nicks and dings, and even helps
in light hail. Coverbond 4 is suggested for moderate weather
or indoor use. |
Mosom™ |
 |
A 3 layer Custom Car Cover fabric
which is similar to Triguard, but with an advanced micro-porus
film middle layer. The film aids in preventing water penetration,
while allowing vapor to escape. Mosom is a good general use
cover. If the vehicle is exposed to significant sun, we suggest
Silverguard or Stormproof. Click here for more detailed information.
|
Silverguard™ |
 |
Similar in properties to Mosom, but
with more sun resistance and slightly less breathability. Silverguard
is a 300 denier polyester woven Custom Car Cover fabric with
a unique encapsulative coating. It is perfect for general use,
even in very sunny climates. The silver coating helps to reflect
sunlight. Click here for more detailed information. |
Stormshield |
 |
Made by Guilford Mills, Stormshield
is a unique polyester knitted Custom Car Cover fabric with a
"peach fizz" lining. The lining adds extra softness and thickness.
Stormshield is perfect for virtually all weather conditions.
Stormshield is available in black, gray, blue, red, yellow and
tan. In addition, two tone combinations are available with black
sides and a color center. |
Stormproof™ |
 |
Coverking was overwhelmed after receiving
test results of our latest design - Stormproof. The culmination
of over a decade of material engineering, it has only recently
been possible to manufacture the microscopic yarns which go
into this advanced micro-fiber Custom Car Cover material. Only
one textile mill in the world was able to meet Coverking's specifications
- and although challenged by Coverking's design, the results
are truly a triumph for car cover users! Stormproof is UNCOATED
and UNTREATED this means that even after months
or years of use, it will have the same properties! Stormproof
feels more like an expensive golf jacket, yet is tested to be
the MOST WATER RESISTANT and (because there are no coatings)
the MOST BREATHABLE. You can't go wrong with Stormproof - available
in gray, black, red, wine, and two tone combinations with black
sides. Click here for more detailed information on Stormproof™.
|

|